Page 369 - Demo

367Foam equipment & accessories 13easyfoam365+ bypass injectors ST-1671/2\chemical dosing is adjusted by 10 exchangeable nozzle inserts (0.5 - 2.0 mm). Max. 350 bar / 100 %u00b0C1/2\chemical dosing is adjusted by 10 exchangeable nozzle inserts (0.5 - 2.0 mm). Max. 500 bar / 100 %u00b0C1/2\Injector ST-167 with metering valve ST-161. Max. 350 bar / 100 %u00b0Ceasyfoam365+ bypass injectors ST-167 without compressed air moduleR+M Nr.200 167 500 1.2 mm200 167 501 1.3 mm200 167 502 1.4 mm200 167 503 1.5 mm200 167 504 1.6 mm200 167 505 1.7 mm200 167 506 1.8 mm200 167 507 1.9 mm200 167 508 2.0 mm200 167 509 2.1 mm200 167 510 2.2 mm200 167 511 2.3 mm200 167 512 2.4 mm200 167 513 2.5 mm200 167 516 2.8 mmR+M Nr.200 167 500 5 1.2 mm200 167 501 5 1.3 mm200 167 502 5 1.4 mm200 167 503 5 1.5 mm200 167 504 5 1.6 mm200 167 505 5 1.7 mm200 167 506 5 1.8 mm200 167 507 5 1.9 mm200 167 508 5 2.0 mm200 167 509 5 2.1 mm200 167 510 5 2.2 mm200 167 511 5 2.3 mm200 167 512 5 2.4 mm200 167 513 5 2.5 mm200 167 516 5 2.8 mmR+M Nr.200 167 600 1.2 mm200 167 601 1.3 mm200 167 602 1.4 mm200 167 603 1.5 mm200 167 604 1.6 mm200 167 605 1.7 mm200 167 606 1.8 mm200 167 607 1.9 mm200 167 608 2.0 mm200 167 609 2.1 mm200 167 610 2.2 mm200 167 611 2.3 mm200 167 612 2.4 mm200 167 613 2.5 mm200 167 616 2.8 mmeasyfoam365+ product line has been enlargedThe injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing. This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry. The cleaning capacity when cleaning and rinsing is not affected at all. A lever makes it possible to change from the cleaning and rinsing mode into injector operation. When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode). When using the injector the available water quantity is guided through the injection area.In combination with a foam lance (ST-72, ST-74 oder ST-75), an adjustable or a triple nozzle the easyfoam365+ injector ST-167 can suck in chemicals by means of the integrated check valve made out of stainless steel. It depends on the chosen nozzle whether the chemical can also be sprayed on or foamed. The foaming covers large areas and a long exposure time is guaranteed. One further advantage of the foam cleaning is that already covered surfaces are easily seen.The easyfoam365+ injector which is available in the nozzle size of 1.2 - 2.8 mm meets the requirements in every field of application in the professional cleaning industry. The dosing is adjusted by one of the 10 nozzle inserts which are included in the consignment. As an alternative there are also versions with the infinitely variable dosing unit ST-161 available.The connection for chemicals equipped with an integrated check valve and an intake for the nozzle inserts has a hose tail for chemical suction hoses being 9 mm in diameter in order to suck in especially viscous fluids. The direction of flow is marked with arrows to guarantee a smooth installation.1/2\Injector ST-167 with metering valve extreme. Max. 350 bar / 100 %u00b0CR+M Nr.200 167 630 1.2 mm200 167 631 1.3 mm200 167 632 1.4 mm200 167 633 1.5 mm200 167 634 1.6 mm200 167 635 1.7 mm200 167 636 1.8 mm200 167 637 1.9 mm200 167 638 2.0 mm200 167 639 2.1 mm200 167 640 2.2 mm200 167 641 2.3 mm200 167 642 2.4 mm200 167 643 2.5 mm200 167 644 2.8 mmSymbols nozzle length wall thickness nominal diameter weight (kg)