Page 14 - Accessories Airline & Tool Accessories

Special Airline Products

Dial-Air™ Regulators Inline Lubricators

These regulators feature a transparent pressure-calibrated, Lubricator body from aluminium. Nitrile seals.
nonrising adjustment dial which allows one to dial any Maximum inlet pressure 13.8 bar (200 psig).
secondary pressure. If a gauge is required for monitoring Intermittent lubricators: oil is fed each time the air is
reasons, two 1/4" gauge ports are provided: however, turned on. They require cyclical or intermittent air flow for
these are usually used for additional outlet port. In less proper operation and work optimally when installed near
than 270° turn, the full secondary pressure range can be the tool.
dialed. This feature is particularly advantageous if secondary
pressure must be changed frequently. 6LUB12

Regulator body and bonnet from zinc. Piston from acetal L01-C2-E29
(R21) or zinc (R31 and 41). Valve assembly from brass,
nitrile and acetal. Nitrile seals. Part Max. flow Bowl Weight
Maximum inlet pressure 20.7 bar (300 psig) – adjusting no. (l/min) capacity (kg)
pressure range 0 to 11 bar (0-160psi).
(litre)

B Inline Lubricators / Constant Feed

R41-CC-000-29 L01-C2-A29 1/4"Fx1/4"F BSP 1000 0.007 0.10

L01-C2-E29 1/4"Fx1/4"M BSP 1000 0.007 0.10

L01-C3-A29 3/8"Fx3/8"M BSP 1000 0.007 0.10

A 8LUB16C-A3 1"F x 1"F BSP 9 900 0.30 0.95

16LUB16C-A3 1"F x 1"F BSP 9 900 0.56 2.00

Inline Lubricators / Intermittent Feed

R21-C4-000-29 3LUB8 1/2"Fx1/2"F BSP 2 820 0.11 0.45

Dimensions 6LUB12 3/4"Fx3/4"F BSP 2 820 0.20 0.70
(mm)
Part Max. flow 8LUB12-A3 3/4"Fx3/4"F BSP 4 920 0.30 121 m0m.95
no. (l/min) AB 0.56 2.00
16LUB16-A3 1"F x 1"F BSP 9 900
R21-C2-000-29 3 300 (1) 104 81 PRESS
R21-C4-000-29 1/4" BSP 5 520 (1) 78 mm TURN
R21-C6-000-29 1/2" BSP 6 240 (1) 104 81
R31-C8-000-29 3/4" BSP 18 300 (2) * Max. operating temperature: 175° C
R31-CA-000-29 19 800 (2) 104 81
R41-CC-000-29 1" BSP 45 300 (2) PRESS
1 1/4" BSP 132 109
TURN
2" BSP 132 109
Automatic Drains 218 mm
173 135
149 mm

No electrical connection - easy to install.

Quick disconnected clamp ring for easy bowl removal

(1) At 6.9 bar (100 psig) inlet pressure. Secondary pressure of 6.0 bar (90 psig). when servicing.
(2) At 6.9 bar (100 psig) inlet pressure. Secondary pressure of 5.5 bar (80 psig).
Operating temperature: 0 - 65°C. Transparent bowl with metal guard as standard.

Airline connection 1/2".

122 mm

31 78 mm (X02)
121 mm (X01)

Chemical Dryer PRESS
TURN
Polycarbonate bowl
with metal guard. 351 149 mm
Dew point -43°. mm (X02)
Desiccant
regeneration +117°C. 320 218 mm
Desiccant replacement: mm (X01)
DRP-85-059
(pack of 8). X02-C4-C29 X01-C4-A29

51 Part
no.
Part 1/4" BSP Flow Max. Weight X02-C4-C29 Bowl Capacity Max. Weight
no. at 7 bar pressure (kg) * X01-C4-A29 capacity at 6.9 bar pressure (kg)

X03-C2-A29 (l/s) (bar) 3.4 (ml) (l/hr) (bar) 0.6
2.1
* With desiccant. 4.7 10.3 148 300 10.3

950 570 10.3

14 Ingersoll Rand Accessories